Product Description
This is our REDATS fully automatic tyre changing package, it is one of our mid-level packages designed to be affordable and robust.
This is the Redats M-221F-3D tyre machine, it is a fully automatic tyre changer machine with a 3-point assist arm to help you tackle low profile and run flat tyres which have become standard in the tyre market these days. This tyre machine operates on 240V and an air supply.
Work with ease!
This tyre changer was designed to make your daily work much easier - the head can be regulated and inserted into one of two sockets. There are also spacy shelves for the accessories that you need in your daily work so, you will have them all at hand!
Third hand as standard
This tyre changer is equipped with the third hand - it locks the parts of the tyre bead below the rim edge, which means a much easier work while you are demounting tyres.
Easy tyre demounting
Thanks to roll and a round ending of the assistant arm, demounting the tyre is even easier than ever.
Application
This tyre changer is designed for work with tyres of passenger cars. Thanks to the assistant arm, it could also be used for low-profile or run-flat tyres.
Unit ready for operation
This tyre changer comes with all the accessories essential for daily operation:
- FILTERING-GREASING UNIT: OILER + WATER SEPARATOR
- TYRE INFLATION GUN
- PLASTIC OVERLAYS FOR DUCKHEAD (ROLLER AND PROTECTOR)
- PLASTIC OVERLAYS FOR JAWS - 4 PCS
- TYRE LEVER
- ACCESSORIES BUCKET
- 3D1 ARM (ROLLER, PLATE, CENTERING CONE)
- THE TYRE CHANGER CAN BE UPGRADED WITH A LEVERLESS ARM (TO BE PURCHASED SEPARATELY)
- AUTOMATIC TYRE CHANGER POWERED WITH 230V (ONE-PHASE)
- AN AUTOMATIC TYRE CHANGER - IT SAVES OPERATORS’ TIME.
- A TYRE CHANGER FOR CAR AND VAN WHEELS - UP TO 24” (INTERNAL CLAMPING) AND 21” (EXTERNAL)
- TYRE CHANGER READY FOR RUNFLAT/LOW-PROFILE TYRES (ARM IN STANDARD)
- UNIT POWERED WITH 3-PHASE (400V)
- POWERFUL TYRE CHANGER: BEAD BREAKER FORCE 2500 KG
The REDATS W-220-wheel balancer is designed to deal with wheels of cars and car-derived vans:
Automatic - saves a lot of time
This is a semi-automatic wheel balancer machine. It will read out all the wheel parameters except the width of the wheel, so the operator saves a lot of time.
Extremely easy use!
Learning to operate the tyre balancer takes a few seconds only. The unit shows the imbalanced spot. It comes with an imbalanced spot positioner - electromechanical brake, sound signal and diodes on the control panel.
Working tempo
Reading out parameters takes a second only. This means much quicker work. Plus, to that, all wheel data (rim diameter, distance) can be read out by a measuring gauge - so there is no risk of errors!
Hassle-free operation
Autocalibration programs are easy to do - it takes just 2 buttons to calibrate (distance gauge, diameter gauge, balancing sensors).
- Rim diameter - 10" - 24"
- Rim width - 1,5" - 20"
- Power source - 230V 50Hz
- Hidden weight programme
- ALU wheel programs 3
- Max wheel weight - 65 kg
- Measuring cycle time - 8 seconds
- Shaft blocking Electromechanics brake
- Imbalance positioning LED lights, sound signal
- Automatic data entering diameter.
- Weight 76 kg
Warranty Information
